Security RFID ID Card Reader

1. Card typeEM-ID/Mifare-IC 2. 5~15CM reading range 3. Wiegand 26/34,RS485/232 out format 4. Two years warranty

Security RFID ID Card Reader feature:

Carrier frequency:125KHUse our access control system,one reader can open many locks at the same timeroximity Card ReaderCard Type: EM-ID Card /125KHz(Mifare format /13.56MHz is option)

Use our access control system,one reader can open many locks at the same time

When the card approach the reader, the red light turn into green, after glinting to turn red color again, the buzzer sound shows transiting data. It has 500ms proximity time distance for card proximity. After finishing card proximity, if the same ID card is still in the proximity range, reader will not send out the data, neither giving any sound hint. But for Different ID card entering Proximity Area, Reader can do response continually and send out the data.

Technical Parameters:

Model	JYC-ID26H
Color	Black / White
Voltage	DC5~16V
Current	≤100mA
Ambient Temperature	-25°C~75°C
Reading Range	5~15CM
Output Format	Wiegand 26/34,RS485/232
Card Type	EM-ID/Mifare-IC
Comunication Distance	WG≤100M,RS485≤1200M

Notice:

Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply. When external Power is used, make sure sharing the power with Controller Box or using the same GND. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.

 RFID ID card reader: 

Security RFID ID Card Reader